Ping Reboot Fundamentals

What Is Cell ICMP Check?

ProRoute's name for ping reboot, and the feature that made it a default habit for UK installers.

Cell ICMP Check is the name ProRoute routers use for ping reboot. I launched ProRoute in 2013, and this was the feature I put front and centre on every router, every setup guide and every support call. The name describes exactly what it does: it checks the cellular connection with ICMP, the protocol ping uses.

Cell ICMP Check at a glance

What it isProRoute’s ping reboot feature
RoutersProRoute H685 and H820
WhereInternet Settings, Cell ICMP Check
Same idea asTeltonika Ping Reboot, MikroTik ping watchdog, ICMP check, health check
Set-up guideProRoute H685 Cell ICMP Check guide

What it does

The router pings one or two hosts. If they stop answering, it treats the mobile data session as dropped, even if the modem still looks registered, and recovers it by reconnecting and restarting the radio module, or the whole router if you choose. It is the answer to a problem every cellular installer meets sooner or later: the router says it is connected and nothing gets through.

Why the name

“Ping reboot” describes the action. “Cell ICMP Check” describes the check: a test of the cell connection using ICMP. We wanted installers to understand it as a health check that keeps the connection honest, not as a feature that reboots things. In practice everyone called it ping reboot anyway.

What made it different

It was not the first ping watchdog. MikroTik had one in the mid-2000s and Teltonika’s early 3G routers had Ping Reboot. What we did differently was the default. On many routers of that era the feature sat in a menu, switched off, waiting for an installer who knew it was there. On a ProRoute router the hosts came pre-filled and enabling it was a tick box, and we talked about it until UK installers started asking every router supplier the same question: does it have ping reboot?

Names for the same thing

  • ProRoute: Cell ICMP Check
  • Teltonika: Ping Reboot, now Ping/Wget Reboot in RutOS
  • MikroTik: ping watchdog
  • Others: ICMP check, connection check, link monitor, health check

The full story, from Mike Muuss writing ping in 1983 to the settings I use today, is in the history of ping reboot. For the meaning of the other terms here, see the glossary.

Questions

What is Cell ICMP Check?

It is the ProRoute router name for ping reboot: the router pings one or two hosts and recovers the cellular connection if they stop answering.

Which routers have Cell ICMP Check?

ProRoute H685 and H820 routers, under Internet Settings, Cell ICMP Check.

Keep reading

Ping Reboot Fundamentals 2 min read

Ping Reboot vs Watchdog vs Scheduled Reboot

The difference between ping reboot, a hardware watchdog and a scheduled reboot, what each one catches, and why a remote router should…

Read explainer